View STGF6NC60HD_739424.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STGB6NC60HD STGF6NC60HD - STGP6NC60HD
N-channel 600V - 7A - D2PAK / TO-220 / TO-220FP Very fast PowerMESHTM IGBT
General features
Type STGB6NC60HD STGP6NC60HD STGF6NC60HD

VCES 600V 600V 600V
VCE(sat)max @25C <2.5V <2.5V <2.5V
IC @100C 7A 7A 3A
3 1 2
1 3 2
TO-220
TO-220FP
Low on voltage drop (Vcesat) Low CRES / CIES ratio (no cross-conduction susceptibility) Very soft ultra fast recovery antiparallel diode High frequency operation
3 1
DPAK
Description
Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advaced family of IGBTs, the PowerMESHTM IGBTs, with outstanding performances. The suffix "H" identifies a family optimized for high frequency application in order to achieve very high switching performances (reduced tfall) mantaining a low voltage drop.
Internal schematic diagram
Applications

High frequency inverters SMPS and PFC in both hard switch and resonant topologies Motor drivers
Order codes
Part number STGB6NC60HDT4 STGP6NC60HD STGF6NC60HD Marking GB6NC60HD GP6NC60HD GF6NC60HD Package DPAK TO-220 TO-220FP Packaging Tape & reel Tube Tube
July 2006
Rev 3
1/17
www.st.com 17
Contents
STGB6NC60HD - STGP6NC60HD - STGF6NC60HD
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Electrical characteristics (curves) ............................. 7
3 4 5 6
Test circuit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/17
STGB6NC60HD - STGP6NC60HD - STGF6NC60HD
Electrical ratings
1
Electrical ratings
Table 1.
Symbol VCES IC(1) IC(1) ICM(2) VGE IF PTOT VISO Tstg Tj Tl
Absolute maximum ratings
Value Parameter DPAK/TO-220 TO-220FP Collector-emitter voltage (VGS = 0) Collector current (continuous) at TC = 25C Collector current (continuous) at TC = 100C Collector current (pulsed) Gate-emitter voltage Diode RMS forward current at Tc=25C Total dissipation at TC = 25C Insulation withstand voltage A.C.(t=1sec;Tc=25C) Storage temperature - 55 to 150 Operating junction temperature Maximum lead temperature for soldering purpose (for 10sec. 1.6 mm from case)
T -T JMAX C I ( T ) = ----------------------------------------------------------------------------------------------------CC R xV (T , I ) THJ - C CESAT ( MAX ) C C
Unit 600 15 7 21 20 10 56 -20 2500 C C 6 3 V A A A V A W
300
1. Calculated according to the iterative formula::
2. Pulse width limited by max junction temperature
Table 2.
Symbol
Thermal resistance
Parameter TO-220 DPAK TO-220FP Value 2 2 5 62.5 Unit C/W C/W C/W C/W
Rthj-case
Thermal resistance junction-case max
Rthj-amb
Thermal resistance junction-ambient max
3/17
Electrical characteristics
STGB6NC60HD - STGP6NC60HD - STGF6NC60HD
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 3.
Symbol VBR(CES) VCE(sat) VGE(th) ICES IGES gfs
Static
Parameter Collector-emitter breakdown voltage Test conditions IC = 1mA, VGE = 0 Min. 600 1.9 1.7 3.75 2.5 Typ. Max. Unit V V V V A mA nA S
Collector-emitter saturation VGE = 15V, IC= 3A voltage VGE= 15V, IC= 3A, Tc= 125C Gate threshold voltage Collector cut-off current (VGE = 0) Gate-emitter leakage current (VCE = 0) Forward transconductance VCE= VGE, IC= 250 A VCE = Max rating,TC= 25C VCE = Max rating,TC= 125C VGE = 20V , VCE= 0 VCE = 15V, IC= 3A
5.75 10 1 100 3
Table 4.
Symbol Cies Coes Cres Qg Qge Qgc ICL
Dynamic
Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Turn-off SOA minimum current Test conditions VCE = 25V, f = 1MHz, VGE = 0 VCE = 390V, IC = 3A, VGE = 15V, (see Figure 18) Vclamp = 390V, Tj = 150C, , RG = 10 VGE = 15V Min. Typ. Max. 205 32 5.5 13.6 3.4 5.1 19 Unit pF pF pF nC nC nC A
4/17
STGB6NC60HD - STGP6NC60HD - STGF6NC60HD
Electrical characteristics
Table 5.
Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(off) tf tr(Voff) td(off) tf
Switching on/off (inductive load)
Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time Test conditions VCC = 390V, IC = 3A , RG= 10 VGE = 15V, Tj = 25C (see Figure 19) VCC = 390V, IC = 3A , RG = 10 VGE = 15V, Tj =125C (see Figure 19) VCC = 390V, IC = 3A, RGE = 10 , VGE = 15V, TJ = 25C (see Figure 19) VCC = 390V, IC = 3A, RGE = 10 , VGE =15V, Tj = 125C (see Figure 19) Min. Typ. 12 5 612 13 4.3 560 40 76 100 60 98 124 Max. Unit ns ns A/s ns ns A/s ns ns ns ns ns ns
Table 6.
Symbol Eon(1) Eoff(2) Ets Eon(1) Eoff(2) Ets
Switching energy (inductive load)
Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test conditions VCC = 390V, IC = 3A , RG = 10 VGE=15V, Tj =25C (see Figure 19) VCC = 390V, IC = 3A , RG = 10 VGE = 15V, Tj = 125C (see Figure 19) Min. Typ. 20 68 88 37 93 130 Max. Unit J J J J J J
1. Eon is the tun-on losses when a typical diode is used in the test circuit in figure 17. If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the same temperature (25C and 125C) 2. Turn-off losses include also the tail of the collector current
5/17
Electrical characteristics
STGB6NC60HD - STGP6NC60HD - STGF6NC60HD
Table 7.
Symbol Vf trr Qrr Irrm trr Qrr Irrm
Collector-emitter diode
Parameter Forward on-voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current Test conditions If = 1.5A If = 1.5A, Tj = 125C If = 3A ,VR = 40V, Tj = 25C, di/dt = 100 A/s (see Figure 20) If = 3A ,VR = 40V, Tj =125C, di/dt = 100A/s (see Figure 20) Min. Typ. 1.6 1.3 21 14 1.36 34 32 1.88 Max. 2.1 Unit V V ns nC A ns nC A
6/17
STGB6NC60HD - STGP6NC60HD - STGF6NC60HD
Electrical characteristics
2.1
Figure 1.
Electrical characteristics (curves)
Output characterisics Figure 2. Transfer characteristics
Figure 3.
Transconductance
Figure 4.
Collector-emitter on voltage vs temperature
Figure 5.
Gate charge vs gate-source voltage Figure 6.
Capacitance variations
7/17
Electrical characteristics Figure 7. Normalized gate threshold voltage vs temperature
STGB6NC60HD - STGP6NC60HD - STGF6NC60HD Figure 8. Collector-emitter on voltage vs collector current
Figure 9.
Normalized breakdown voltage vs temperature
Figure 10. Switching losses vs temperature
Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector current
8/17
STGB6NC60HD - STGP6NC60HD - STGF6NC60HD Figure 13. Thermal impedance for TO-220 / DPAK
Electrical characteristics
Figure 14. Turn-off SOA
Figure 15. Thermal impedance for TO-220FP
Figure 16. Emitter-collector diode characteristics
9/17
Test circuit
STGB6NC60HD - STGP6NC60HD - STGF6NC60HD
3
Test circuit
Figure 18. Gate charge test circuit
Figure 17. Test circuit for inductive load switching
Figure 19. Switching waveform
Figure 20. Diode recovery time waveform
10/17
STGB6NC60HD - STGP6NC60HD - STGF6NC60HD
Package mechanical data
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at : www.st.com
11/17
Package mechanical data
STGB6NC60HD - STGP6NC60HD - STGF6NC60HD
TO-220 MECHANICAL DATA
DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154
oP
Q
12/17
STGB6NC60HD - STGP6NC60HD - STGF6NC60HD
Package mechanical data
D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA
mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch
3
1
13/17
Package mechanical data
STGB6NC60HD - STGP6NC60HD - STGF6NC60HD
TO-220FP MECHANICAL DATA
mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O
A
B
L3 L6 L7
F1 F
D
G1 H
F2
L2 L5
E
123
L4
14/17
G
STGB6NC60HD - STGP6NC60HD - STGF6NC60HD
Packaging mechanical data
5
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
15/17
Revision history
STGB6NC60HD - STGP6NC60HD - STGF6NC60HD
6
Revision history
Table 8.
Date 28-Nov-2005 07-Mar-2006 31-Jul-2006
Revision history
Revision 1 2 3 First Release Complete version Modified Figure 10. Changes
16/17
STGB6NC60HD - STGP6NC60HD - STGF6NC60HD
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
17/17

▲Up To Search▲

Price & Availability of STGF6NC60HD

	To Download STGF6NC60HD Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .